Previous
You can make a two-page spread original onto both sides of the paper.
You cannot use the ADF with this function.
There are two types of Spread Duplex.
Spread 
2 Sided
Copies a two-page spread original onto one sheet with one page per side.
Spread 2 Sided (Spread)
Copies each two-page spread original as it is onto both sides of a sheet.
The following table shows the paper sizes for Spread 2 Sided when the reproduction ratio is 100%:
Original |
Paper |
|---|---|
A3 |
A4 |
B4 JIS |
B5 JIS |
A4 |
A5 |
11 × 17 |
81/2 × 11 |
81/2 × 11 |
51/2 × 81/2 |
(2-sided)
Press [Other Func.].
Press [Spread Duplex].
Select [Spread 2 Sided] or [Spread 2 Sided (Spread)].
Press [OK] twice.
Select the paper tray.
Place the originals, and then press the [Start] key.
Originals whose sizes and orientations are different cannot be copied.
You can change the orientation for copy. For details, see Specifying the Original and Copy Orientation
.
