Skip header
 

The machine assembles copies as sets in sequential order.

Important

  • You cannot use the bypass tray with Rotate Sort.

Region A icon(mainly Europe and Asia)

Depending on your model and which options are installed on it, the Rotate Sort function might not be available. For details, see "Functions Requiring Optional Configurations", Getting Started.

To use the Rotate Sort function, two paper trays loaded with paper of the same size and type, but in different orientation (PortraitLandscape) are required. For details, see "System Settings", Connecting the Machine/ System Settings.

Sort

Copies are assembled as sets in sequential order.

Illustration of Sort

Rotate Sort

Every other copy set is rotated by 90 degrees (PortraitLandscape) and delivered to the copy tray.

Illustration of Sort

1Press [Other Func.].

Operation panel screen illustration

2Press [Down arrow key].

3Press [Sort].

4Select [Sort] or [Rotate Sort], and then press [OK] twice.

Operation panel screen illustration

5Enter the number of copy sets using the number keys.

6Place the originals, and then press the [Start] key.

Note

  • If you are copying from the exposure glass, a single copy of each original is made first. If the first copy set is acceptable, you can make the remaining copy sets by pressing the [Sharp] key. The time required for copy sets to be delivered varies depending on the print settings.

  • Paper sizes and orientations that can be used in the Rotate Sort function are as follows:

    • A4PortraitLandscape, A5PortraitLandscape, B5 JISPortraitLandscape, 81/2 × 11PortraitLandscape, 8 × 101/2PortraitLandscape, 8 × 10PortraitLandscape, 71/4 × 101/2PortraitLandscape, 51/2 × 81/2PortraitLandscape, 16KPortraitLandscape

  • When using the Rotate Sort function, the capacity may be reduced.

  • The number of sheets that can be placed in Internal Tray 1 is 250. For details about the number of sheets that can be placed in Internal Tray 2, see "Specifications", Maintenance and Specifications.

  • You can change the settings for the Sort function under [Input/Output] in User Tools. For details, see Input/Output.