Separately copies the front and back of a 2-sided original or the two facing pages of a bound original onto two sheets.
You cannot use the Spread 1 Sided function from the ADF.
The following table shows the paper sizes for Spread 1 Sided when the reproduction ratio is 100%:
Original |
Paper for 1-sided copy |
---|---|
A3 |
A4 × 2 sheets |
B4 JIS |
B5 JIS × 2 sheets |
A4 |
A5 × 2 sheets |
11 × 17 |
81/2 × 11 × 2 sheets |
81/2 × 11 |
51/2 × 81/2 × 2 sheets |
There are two types of Series Copies.
2 Sided 1 Sided
You can make one-sided copies from two-sided originals.
Spread 1 Sided
You can make one-sided copies from two facing pages of a bound original (book).
Press [Other Func.].
Press [Series].
Select [2 Sided 1 Sided] or [Spread 1 Sided].
To specify whether the orientation of the original is readable or unreadable, press [Orig.'s Orientation].
Press [OK] twice.
Place the originals, and then press the [Start] key.
If you specified [2 Sided 1 Sided], you can specify the orientation. For details, see Specifying the Original and Copy Orientation.