Previous
If the specified paper size differs from the actual size of the paper loaded in the paper tray, a misfeed might occur because the correct paper size was not detected.
Paper Tray Priority: Printer
Specify the tray to supply paper for output.
Default: [Tray 1]
Tray Paper Size: Tray 2–5
Select the size of the paper loaded in the Tray 2–5. For details about available paper sizes, see Supported Paper for Each Input Tray
.
[Tray Paper Size: Tray 3] can be selected only when the 500-sheet paper feed unit, 1000-sheet paper feed unit, or 2000-sheet paper feed unit is installed.
[Tray Paper Size: Tray 4] can be selected only when the 1000-sheet paper feed unit is installed.
[Tray Paper Size: Tray 5] can be selected only when the 500-sheet paper feed unit and 1000-sheet paper feed unit are installed.
Default: [Auto Detect]
Printer Bypass Paper Size
Select the size of the paper loaded in the bypass tray. For details about available paper sizes, see Supported Paper for Each Input Tray.
Default: [Auto Detect]
Paper Type: Bypass Tray
Select the type of the paper loaded in the bypass tray. For details about available paper types, see Supported Paper for Each Input Tray. For details about available paper thickness, see Notes about Paper Thickness.
Paper Type
Default: [Plain Paper]
Paper Thickness
Default: [Plain Paper]
Apply 2 sided
Default: [Yes]
Apply Auto Paper Select
Default: [No]
Paper Type: Tray 1–5
Select the type of the paper loaded in the Tray 1–5. For details about available paper types, see Supported Paper for Each Input Tray. For details about available paper thickness, see Notes about Paper Thickness.
[Paper Type: Tray 3] can be selected only when the 500-sheet paper feed unit, 1000-sheet paper feed unit, or 2000-sheet paper feed unit is installed.
[Paper Type: Tray 4] can be selected only when the 1000-sheet paper feed unit is installed.
[Paper Type: Tray 5] can be selected only when the 500-sheet paper feed unit and 1000-sheet paper feed unit are installed.
You cannot set "Apply Auto Paper Select" when "Apply 2 sided" is set to [No] or the paper size is set to [Custom Size].
Paper Type
Default: [Plain Paper]
Paper Thickness
Default: [Plain Paper]
Apply 2 sided
Default: [Yes]
Apply Auto Paper Select
Default: [Yes]
Paper Type: LCT
Select the type of the paper loaded in the LCT (1200-sheet paper feed unit). For details about available paper types, see Supported Paper for Each Input Tray.
This item can be selected only when the LCT (1200-sheet paper feed unit) is installed.
You cannot set "Apply Auto Paper Select" when "Apply 2 sided" is set to [No] or the paper size is set to [Custom Size].
Paper Type
Default: [Plain Paper]
Paper Thickness
Default: [Plain Paper]
Apply 2 sided
Default: [Yes]
Apply Auto Paper Select
Default: [Yes]
For details about how to access the [System Settings] screen, see Displaying the Printer Configuration Screens Using the Control Panel
.In [Plain Paper Setting] in [Maintenance: Print], you can specify the thickness of the plain paper you load. For details, see Maintenance: Print
.
