Skip header
 

Top Page > Advanced Printing > Memory/Class > Select Department > Printing for all departments

Printing for all departments

1Press the [Memory/Class] key.

User Tools key illustration

2Use the [Left arrow key] or [Right arrow key] key to select [Select Department], and then press the [OK] key.

Operation panel screen illustration

3Use the [Left arrow key] or [Right arrow key] key to select [All], and then press the [OK] key.

Operation panel screen illustration

4Set your original.

5Make sure the [Master Making] mode select key is lit.

If it is not lit, press the [Master Making] mode select key.

Master Making mode select key illustration

6Press the [Start] key.

Start key illustration

7Printing starts automatically after the trial print.

Note

  • If you want to check the image before printing, press the [Auto Cycle] key before pressing the [Start] key, in order to disable Auto Cycle mode. See When Auto Cycle Mode Is Off.