



	Contents Previous Next

Top Page > Using the Scanner Function > Registering Scan Destinations > Modifying Scan Destinations

Modifying Scan Destinations

This section describes how to modify the information of registered destinations.

Start the Web browser, and access the machine by entering its IP address.
Click [Scan Destination].
Click the [E-mail Address], [FTP], or [Folder] tab.
Select the entry to modify, and then click [Change].
Modify settings as necessary.
Enter the administrator password if required.
Click [Apply].
Close the Web browser.

You can unassign a Quick Dial entry from a One-touch button from the [Quick Dial Destination] page. To do this, select the desired entry, click [Delete], and then click [Apply] again on a confirmation page.
The machine will notify you if the destination you want to modify is set as a forwarding destination of received faxes.

For details about using Web Image Monitor, see Using Web Image Monitor.
For details about fax forwarding settings, see Configuring the Fax Settings.