Skip header
 

Top Page > General Settings Guide > System Settings > General Features > Selectable Output Trays > If there is no finisher installed

If there is no finisher installed

This illustration shows the output trays that can be selected when there is no finisher installed and the stacker is being used.

Illustration of Stacker numbered callout illustration

Illustration of Stacker numbered callout illustration

Illustration of Stacker numbered callout illustration

Illustration of Stacker numbered callout illustration

  1. Stacker Upper Tray

  2. Stacker Tray

  3. Second Stacker Tray

Default: [Stacker Upper Tray]

Note

  • [Second Stacker Tray] appears only if [Output Tray] is set to [According to Function Setting] in [Output Tray Setting]. If you set [Output Tray] to [Auto Change], you can specify [Stacker Tray], in which case, the stacker tray or second stacker tray will be automatically selected.