Timer Settings
This section describes the user tools in the Timer Settings menu under System Settings.
Auto Off Timer
After a specified period has passed, following job completion, the machine automatically turns off, in order to conserve energy. This function is called "Auto Off".
The machine status after the Auto Off operation is referred to as "Off mode".
For the Auto Off Timer, specify the time to elapse before Auto Off.
You can specify this setting only if [AOF (Always On)] is set to [On] in [Administrator Tools] in [System Settings].
Default: [240 minute(s)]
The time can be set from 1 to 240 minutes, using the number keys.
Auto Off may not work when error messages appear.
Energy Saver Timer
Set the amount of time the machine waits before switching to lower-power mode after printing has finished or the last operation is performed.
Default: [15 minute(s)]
The time can be set from 1 to 240 minutes, using the number keys.
Panel Off Timer
Set the amount of time the machine waits before switching the panel off after printing has finished or the last operation is performed.
Enter a time interval between 10 seconds and 240 minutes, using the number keys.
Default: [On], [1 min. 0 sec.]
System Auto Reset Timer
The System Reset setting automatically switches the screen to that of the function set in Function Priority when no operations are in progress, or when an interrupted job is cleared. This setting determines the system reset interval.
The time can be set from 10 to 999 seconds, using the number keys.
Default: [On], [60 second(s)]
Set Date
Set the date for the machine's internal clock using the number keys.
To change between year, month, and day, press [
] and [
].
Set Time
Set the time for the machine's internal clock using the number keys.
Enter the time using the 12-hour format (in 1 second increments).
To change between hours, minutes and seconds, press [] and [].
Auto Logout Timer
Specify whether or not to automatically log out a user when the user does not operate the machine for a specified period of time after logging in.
The time can be set from 60 to 999 seconds, in one second increments, using the number keys.
Default: [On], [180 second(s)]
Weekly Timer Code
Set a password (using not more than eight digits) for turning on the power during the time periods when "Weekly Timer" turns off the machine's power.
In order to make this setting, administrator authentication must be enabled. For details, consult your administrator.
Default: [Off]
If you have selected "On", enter the password.
When you select "On", you cannot use the machine even if you turn the power switch to "On", unless you enter the password.
If you select "Off", you do not have to enter a password to switch on the machine, you need only turn the power switch to "On".
Binding Glue Heater Auto Off Timer
Specify how long the machine keeps the glue heated.
This setting appears only when the perfect binder is installed.
If you select "Heater Always On", the binding glue heater does not turn off automatically. You can specify a heating time of 10 minutes to 4 hours.
Default: [30 minutes]
Weekly Timer: Monday - Sunday
Set the daily time when the power is switched on/off.
Enter the time using the 12-hour system.
Enter the "hour" and "minute" using the number keys.
