Placing Originals

This section describes the procedure for placing originals on the original table.

Place one original at a time on the original table.
Once an original start to feed in, do not push or pull it. This may damage the original.
If the original's front or rear edge is badly curled, smooth it out with both hands before scanning. If the original is inserted as is, it may be damaged.
When inserting an original, push it lightly against the rollers. Pushing it with force may cause an original jam.
When inserting an original, be careful not to put the trailing edge into the entrance of the bypass tray. This will cause an original jam.

Place originals after any correction fluid or ink has completely dried. Not taking this precaution will result in a dirtied exposure glass and blemished copies.
Dust and residue from originals drawn with a pencil can result in a dirtied exposure glass and blemished copies. We recommend using the carrier sheet for this type of original.