ManualsContentsPreviousNext |
When Wide Scan is selected, the machine scans using a predetermined width, regardless of the actual width of the original.
You can copy a custom size original without specifying its horizontal and vertical sizes.
If the paper size you want to copy onto is larger than that of the original, this function shifts the image to the upper center of the paper.
If the paper size you want to copy onto is smaller than that of the original, this function copies the top center part of the image.
You cannot use the bypass tray with this function.
Press [Wide Scan].
If you select Wide Scan, the scan width is determined by the sum of the selected paper size and a specified reduction/enlargement ratio. The maximum width of Wide Scan is 914 mm (36 inches).
When originals are scanned and stored in Document Server using this function, the stored original size is the paper size of the selected paper tray.
Depending on the paper cut method you are using, some functions cannot be used with this function. For details, see “Function Compatibility”.