Skip headerGelSprinter GX7000
ContentsPreviousNextHelp

Attaching the Multi Bypass Tray BY1010

  1. Make sure the printer's power cord is unplugged.

  2. Take the multi bypass tray out of its box.

  3. Remove the orange tape from the multi bypass tray.

  4. Fully insert the multi bypass tray.

    image

  5. When using the multi bypass tray, pull out its extension and adjust the side guides according to the size of the loaded paper.

After attaching the paper feed unit, you must register where to start printing on paper loaded in the paper feed unit.

Reference