Head Position

Press the [Menu] key.

Press the [] or [] key to display [Maintenance], and then press the [Yes] key.

Maintenance?         OK=Yes / or 1-9

Press the [] or [] key to display [Head Position], and then press the [Yes] key.

4 Head Position?     OK=Yes

Press the [] or [] key to display [Print Test Pattern], and then press the [Yes] key.

*Print Test Pattern  , & Yes

Press the [] or [] key to select a test pattern, and then press the [Yes] key.

*Quality/Speed      , & Yes

To adjust print-head positions for all resolutions, repeat this procedure selecting the other resolution.

A test pattern to adjust print-head positions is printed.

Check the optimal adjustment values on the printed test pattern.

The optimal adjustment value is the column number that appears above the lightest gray square with straight vertical lines on both sides. When the column number is “2” for the “A” line, the optimal adjustment value is “2” for “A”.

Press the [] or [] key to display [Adjust], and then press the [Yes] key.

*Adjust              , & Yes

Press the [] or [] key to select a resolution from step 5., and then press the [Yes] key.

*Quality/Speed      , & Yes

Press the [] or [] key to select a line, and then press the [Yes] key.

*A    B    C          , & Yes

Press [] or [] key to enter the optimal adjustment values from step 6., and then press the [Yes] key.

Adj=+4                , & Yes

Press the [No] key to display “Cancel?”, and then press the [Yes] key.

The Maintenance screen appears.

Press the [No] key.

The initial screen appears.