Skip headerimageimage
ContentsPreviousNextHelp

Sending a Fax Using the On Hook Dial Function

The On Hook Dial function allows you to dial while listening to the tone from the internal speaker. You can send a fax checking the connection.

This function is available in immediate transmission mode only.

This function is not available for Internet Fax.

  1. Press the [Memory Trans.] key.

    panel keys illustration

    Make sure the [Memory Trans.] indicator is unlit.

  2. Place the original.

    16:00    Std    100%
     -Set Orig- Fax Only

    To change the scan settings, press the [Resolution] key, and then specify the settings.

  3. Press the [On Hook Dial] key.

    panel keys illustration

    *On-hook*           
                        

    You will hear a low tone from the internal speaker.

    To cancel this operation, press the [On Hook Dial] key again, or press the [Clear/Stop] key.

  4. Specify the destination.

    =123456           
                        

    If you have specified the destination using the [Quick Dial] key, proceed to step 6..

    If you make a mistake, press the [Clear/Stop] key, and then enter the correct number.

  5. Press the [B&W Start] key.

    panel keys illustration

  6. When the line is connected and you hear a high-pitched tone, press the [B&W Start] key.

    panel keys illustration

    The transmission starts.

    After transmission, the initial screen appears.

    To cancel a transmission, press the [Clear/Stop] key, and then remove the originals.

Note

Reference