When Printing Does Not Start
If the indicator below the Attention light does not flash in blue after you execute a print job, the machine is not receiving the print data correctly. Check the connection with the DFE and the print settings.
Cause | Solution and reference |
|---|---|
There is a problem in the network connection. | Check the cables connected to the machine and DFE, disconnect and then connect them again. Check the connection to a hub or router, and turn off and on the power of that device if it is possible to do so without affecting other devices. Next, turn off the power of the machine, wait for 10 seconds or more after confirming that the main power indicator is turned off, and then turn on the power. |
The login user name and/or password is incorrect. | Check that the login user name and password are entered correctly. |