Skip header
 

Replacing the Rollers in the Bypass Tray

1Remove the cover.

machine illustration

2Remove the screw.

machine illustration

3Remove the plate.

machine illustration

4Remove the screw, and then slide the bracket.

machine illustration

5Remove the paper feed roller in the following order:

(1) Snap ring and pick-up roller

(2) Snap ring and feed roller

(3) Snap ring and separation roller

machine illustration

6Attach the new paper feed roller in the following order:

(1) Separation roller and Snap ring

(2) Feed roller and Snap ring

(3) Pick-up roller and Snap ring

machine illustration

7Slide the bracket back to its original position, and then secure it with the screw.

machine illustration

8Attach the plate.

machine illustration

9Secure the plate with the screw.

machine illustration

10Attach the cover.

machine illustration

11Reset the counter for replaceable parts.

Do not turn the machine on until you have read how to do so.

See Resetting the Replaceable Parts Counter.