To correct skew, adjust the paper bending allowance at registration. Use [+] or [-] to increase or decrease the bending allowance.
By adjusting the degree of paper arching for relatively stiff thick paper, you can prevent image misalignment and paper skew.
This setting is only effective for paper of Paper Weight 5 to 8.
For paper of Paper Weight 0 to 4, specify 0103 [Registration Gate: Paper Buckle Amount].
Setting Item |
Default Value |
Max. Value |
Min. Value |
Step |
Unit |
---|---|---|---|---|---|
[Paper Weight 5] |
0 |
5 |
-5 |
1 |
Mm |
[Paper Weight 6] |
|||||
[Paper Weight 7] |
|||||
[Paper Weight 8] |