Previous
To correct skew, adjust the paper bending allowance at registration. Use [+] or [-] to increase or decrease the bending allowance.
If the paper arching is too small or too large, the image may be misaligned or the paper may become skewed.
This setting is only effective for paper of Paper Weight 0 to 4.
When using paper of Paper Weight 5 to 8, the setting specified in 0104 [Registration Gate: Paper Buckle Amount: Thick Paper] takes precedence.
Setting Item |
Default Value |
Max. Value |
Min. Value |
Step |
Unit |
|---|---|---|---|---|---|
[Tray 1-3] |
2 |
5 |
-5 |
1 |
mm |
[Tray 4-A, T1-T4] |
|||||
[2 Sided] |
