Skip header
 

0105 [Deactivate Image Position Adjustment Across Feed]

Set whether to adjust registration with across feed direction.

Printing will stop when the vertical position has deviated exceeding the adjustable range (3 mm/0.1inch). Specify [Deactivate Only Jam Detection] to continue printing.

This function relies on a sensor that receives light reflected from the paper's surface. Because of this, it may not work with dark paper, transparent film, or printed paper that has no margins. If this function does not work with the paper you have loaded, disable this function by selecting [Deactivate].

Setting Items

Values

Default Value

[Tray 1]

[Do not Deactivate]

[Deactivate]

[Deactivate Only Jam Detection]

[Do not Deactivate]

[Tray 2]

[Tray 3]

[Tray 4]

[Tray 5]

[Tray 6]

[Tray A]

[2 Sided]

[Tray T1]

[Tray T2]

[Tray T3]

[Tray T4]

Note

  • This setting is not effective for paper fed from paper trays with custom paper presets. For such paper, the value specified in [Deactivate Image Position Adjustment Across Feed] in 1101 [Image Position] in "Advanced Settings" takes precedence.

PreviousNext