Adjusting Copy Image Density
There are five image density levels. The higher the density level, the darker the printout.
Press the [Copy] key.
Press the selection key under [Density].
Press the [
] or [
] key to select the desired density level, and then press the [OK] key.
You can change the machine's default [Density] setting to always make copies with a specific density level. For details, see Copier Features Settings.
Temporary job settings are cleared in the following cases:
When no input is received for the period of time specified in [System Auto Reset Timer] while the initial screen is displayed. For details, see Administrator Tools Settings.
When the [Clear/Stop] key is pressed while the initial screen is displayed.
When the machine's mode is changed.
When the power is turned off.
When the machine's default for the same setting is changed.