Copier Features Settings
You can use the ADF on M 2701 and G1127.
Item | Description | Value |
---|---|---|
Sort | Configures the machine to sort the output pages into sets when making multiple copies of a multi-page document (P1, P2, P1, P2...). When [Rotate Sort] is selected, the machine outputs sets of pages in portrait and landscape orientation alternately. To use the rotate sort function, all of the following conditions are required:
|
Default: [Off] |
Original Type | Specifies the content of originals, to optimize copy quality. |
|
Original Type | Specifies the content of originals, to optimize copy quality. |
Default: [Mixed] |
Density | Specifies the image density for photocopying. | Increase the level (black squares) to increase the density. Default: The default setting is the middle of 5 adjustment levels. |
Reduce/Enlarge | Specifies the percentage by which copies are enlarged or reduced. Note that enabling combined copying disables the setting specified in this item, and applies [Auto R/E] automatically. |
Default: [100%] |
Duplex | Specifies duplex copying. Select a copy mode according to your original and how you want the copy outputs to appear. For more details, see Duplex Copying. Note that enabling duplex copying automatically disables ID card copying. |
Default: [1Sided->1Sided] |
Combine | Specifies combined copying. Select a copy mode according to your original and how you want the copy outputs to appear. For more details, see Combined Copying. Note that enabling combined copying automatically disables ID card copying. |
Default: [Off] |
ID Card Copy | Specifies the ID Card Copy setting. |
Default: [Off]
Default: [Do not Print]
Default(horizontal × vertical): 63 × 95mm (2.49 × 3.75 inches)
Default: [Mixed] |
Resolution | Specifies the resolution for scanning the original. |
Default: [Standard] |
Orientation | Specify the orientation of printouts when using the duplex/combined function. |
Default: [Always Specify] |
Folder Print | You can store scanned documents on the machine. | - |
APS/Auto R/E Priority | Enables the auto paper select function or auto reduce/enlarge function. If the auto paper select function is active, the machine automatically selects a paper tray to which the paper suitable for the original has been loaded. If the auto reduce/enlarge function is active, the machine automatically selects the zoom ratio suitable for the size of the original and the size of the paper loaded to the specified tray. Note that enabling combine copying, ID card copying, or Folder Print automatically disables the auto paper select function. |
Default: [Auto Paper Select Priority] |
Auto Tray Switching | Sets the machine to continue printing when the specified tray runs out of paper while copying by switching to another tray to which paper of the same size, type, and direction is loaded. |
Default: [On] |
Original Count Display | Displays the number of originals on the screen in copier mode. |
Default: [Off] |
Duplex Margin | Specifies the top and left margin when duplex copying. |
Default (top margin × left margin): 0 × 0mm (0.00 × 0.00 inches) |
Letterhead Setting | Specifies whether to copy in the letterhead mode. In the letterhead mode, the machine performs duplex printing where the front of the sheet is an odd-numbered page. |
Default: [Off] |
Max.Number of Sets | Specifies the maximum number of sets. | 1 to 999 Default: 999 |
RotaSort:AutoContinue | Sets the machine to continue sort printing when the specified tray runs out paper while performing rotate sort copying and there is no other tray to perform rotate sort copying. To use this function, [Auto Tray Switching] must be set to [On]. |
Default: [Off] |