Administrator Tools Settings

You can use the ADF on M 2701 and G1127.

Item	Description	Value
Set Date/Time	Sets the date and time of the machine’s internal clock. (Default may differ depending on the Country setting.)	Set Date Specifies the date of the machine’s internal clock. Only dates that correspond with the year and month can be set. Incompatible dates will be refused. Default date format: [Year/Month/Day] Date format: Month/Day/Year, Day/Month/Year, or Year/Month/Day Year: 2000 to 2099 Month: 1 to 12 Day: 1 to 31 Set Time Sets the time of the machine’s internal clock. Default date format: [12-hour Format] Time format: 12-hour Format, 24-hour Format AM/PM stamp: AM, PM (for 12-hour Format) Hour: 0 to 23 (for 24-hour Format), or 1 to 12 (for 12-hour Format) Minute: 0 to 59
Function Priority	Specifies the mode that is activated when the power is turned on, or if the time specified for [System Auto Reset Timer] elapses without activity while the initial screen of the current mode is displayed.	Copier Scanner Default: [Copier]
System Auto Reset Timer	Sets the machine to return to the mode specified in [Function Priority].	Off 30 sec. 1 min. 2 min. 3 min. 5 min. 10 min. Default: [1 min.]
Energy Saver Mode	Sets the machine to enter Energy Saver mode, Energy Saver mode 1, Energy Saver mode 2, or Silent Print mode to reduce power consumption. To exit Energy Saver mode 1 or Energy Saver mode 2, do one of the following: Lift the ADF Lift the exposure glass cover Place an original in the ADF Press the [Energy Saver] key Start print jobs	EnergySaverMode 1 The machine enters Energy Saver mode 1 if the machine has been idle for about 30 seconds. It takes less time to recover from Energy Saver mode 1 than from power-off state or Energy Saver mode 2, but power consumption is higher in Energy Saver mode 1 than in Energy Saver mode 2. Off On Default: [Off]
Energy Saver Mode	Sets the machine to enter Energy Saver mode, Energy Saver mode 1, Energy Saver mode 2, or Silent Print mode to reduce power consumption. To exit Energy Saver mode 1 or Energy Saver mode 2, do one of the following: Lift the ADF Lift the exposure glass cover Place an original in the ADF Press the [Energy Saver] key Start print jobs	EnergySaverMode 2 The machine enters Energy Saver mode 2 after the period of time specified for this setting is passed. The machine consumes less power in Energy Saver mode 2 than in Energy Saver mode 1, but it takes longer to recover from Energy Saver mode 2 than from Energy Saver mode 1. 1 to 60 minutes, in increments of 1 second Default: [1 min.] ([On] (1 to 240 minutes) or [Off] may appear depending on the machine’s settings.)
Energy Saver Mode	Sets the machine to enter Energy Saver mode, Energy Saver mode 1, Energy Saver mode 2, or Silent Print mode to reduce power consumption. To exit Silent Print mode, do one of the following: Lift the ADF Lift the exposure glass cover Place an original in the ADF Press one of the keys on the control panel (except the [Energy Saver] key) Start TWAIN scanning operation	Silent Print Mode The machine enters Silent Print mode when it receives a print job while in Energy Saver mode. In Silent Print mode, the fan speed slows down so that the fan makes less noise. Note that the fan speed does not slow down if you restrict the use of certain functions of this machine. 1 to 120, in increments of 1 sec Default: 3
Language	Specifies the language used on the screen and in reports. The default value for this setting is the language you have specified during the Initial Setup, which is required after turning on the machine for the first time.	English French Spanish Czech Hungarian Polish Russian Simplified Chinese Turkish German Italian Portuguese Arabic
Reset Settings	Be sure not to clear the settings by mistake.	Reset All Settings Resets the machine's settings to their defaults except the following: Language settings Network settings Press the [OK] key, and then press the selection key under [Yes] to execute. Reset Network Settings Resets the network settings to their defaults. Press the [OK] key, and then press the selection key under [Yes] to execute.
Admin. Tools Lock	Specifies a four-digit password for accessing the [Network Settings], [WiFi Setup Wizard], and [Admin. Tools] menus. Do not forget this password.	On (0000 to 9999) Off Default: [Off]
Fldr Prt Lock	Sets a password to use the "Folder Print" function.	On (0000 to 9999) Off Default: [Off]
Clear PCU Counter	Clears the counter for PCDU. This item may not appear depending on the machine’s settings.	-
Clr PM Part Alert	Clears alerts that notify the replacement of PM parts. This item may not appear depending on the machine’s settings.	-
IPsec	Selects whether to enable or disable IPsec. This function appears only when a password is specified under [Admin. Tools Lock].	Inactive Active Default: [Inactive]
Save Scn Data to USB	Specify whether to enable or disable Scan to USB. This function appears only when a password is specified under [Admin. Tools Lock].	Inactive Active Default: [Active]