If a Paper Mismatch Occurs
The machine reports an error if:
The paper size does not match the print job's settings when [Size Mismatch Detection] under [Tray Paper Settings] is enabled.
The paper type does not match the print job's settings when [Input Tray:] is set to [Auto Tray Select].
There are two ways to resolve these errors:
Continue printing using mismatched paper
Ignore the error and print using mismatched paper.
Cancel the print job
Cancel printing.
For details about [Size Mismatch Detection], see System Settings.
If [Auto Continue] under [System Settings] is enabled, the machine ignores the paper type and size settings and prints on whatever paper is loaded. Printing stops temporarily when the error is detected, and restarts automatically after about ten seconds using the settings made on the control panel. For details about [Auto Continue], see System Settings.