User GuideIM 350/430 series

Specifying Log Collect Settings

Enable the collection settings for each kind of log and configure the collection level.

Job Log Collect Level

If "Job Log Collect Level" is set to [Level 1], all job logs are collected.

Access Log Collect Level

If "Access Log Collect Level" is set to [Level 1], the following items are recorded in the access log:

  • HDD Format

  • All Logs Deletion

  • Log Setting Change

  • Log Collection Item Change

If "Access Log Collect Level" is set to [Level 2], all access logs are collected.

Eco-friendly Log Collect Level

If "Eco-friendly Log Collect Level" is set to [Level 1], eco-friendly logs are not collected.

If "Eco-friendly Log Collect Level" is set to [Level 2], all eco-friendly logs are collected.

You can specify the collection level using a web browser from networked computers. (We use Web Image Monitor installed on this machine.)

1Open a web browser from a networked computer, and then log in to Web Image Monitor as the machine administrator.

For details on how to log in, see Administrator Login Method.

2Point to [Device Management], and then click [Configuration].

3Click [Logs] under "Device Settings".

4Select [Active] for each function: "Collect Job Logs", "Collect Access Logs" and "Collect Eco-friendly Logs".

5Specify the collection level for each function, "Job Log Collect Level", "Access Log Collect Level", and "Eco-friendly Log Collect Level".

When a level is changed, the selection status of log details changes according to the level.

To change individual items of the log details, configure the setting for each item. Even if the collection level is set to [Level 1] or [Level 2], once each item of the log details is changed, the level changes to [User Settings].

6Click [OK].

7“Updating...” appears. Wait for about 1 or 2 minutes, and then click [OK].

If the previous screen does not appear again after you click [OK], wait for a while, and then click the web browser's refresh button.

8Log out.

For details about logging out, see Administrator Logout Method.

Note

  • The greater "Access Log Collect Level" setting value, the more logs are collected.