Procedure for copying onto custom size paper (classic)
Paper that has a horizontal length of 60.0-216.0 mm (2.37-8.50 inches) and a vertical length of 127.0-900.0 mm (5.00-35.43 inches) can be fed in from the bypass tray.
Press [Home] (
) at the bottom of the screen in the center.
Press the [Copier (Classic)] icon.
Load the paper face up in the bypass tray.
The bypass tray paper settings screen is automatically displayed.
When [Do not Display] is selected in [Display Paper Settings in Bypass], the bypass tray paper settings screen is not displayed. In this case, make sure that the bypass tray [
] is selected and press [
]. When [Display Automatically] is selected in [Display Paper Settings in Bypass], even if you press the bypass tray [] instead of [], the bypass tray paper settings screen is displayed. For details, see General Features.
Press [Change Setting].
Select the paper type, and then press the [Next] icon.
Press [Custom Size].
Press the [A] text box and enter the size using the soft keyboard, and then press [Done].
Press the [B] text box and enter the size using the soft keyboard, and then press [Done].
Press [OK] three times.
Place the originals, and then press [Start].
You can register a combinations of paper sizes and types. For details, see Procedure for Registering Combinations of Paper Sizes and Types (Classic). You can also recall the registered combinations of paper sizes and types. For details, see Procedure for recalling registered paper settings (classic).