Previous
This section describes the user tools in the Date Stamp menu under [Stamp].
Format
You can select the date format for Date Stamp mode.
Default:
(mainly Europe and Asia)
[DD / MM / YYYY]
(mainly North America)
[MM / DD / YYYY]
Font
You can select the date stamp font.
Default: [Font 1]
Size
You can select the date stamp size.
Default: [Auto]
Superimpose
You can have the date stamp printed in white when it overlaps black parts of the image.
Default: [Off]
Stamp Setting
Specify how the date stamp is printed.
Stamp Position
Specify where to print the date stamp. For details about the stamp position, see "Stamps", Basic Operations.
Default: [Top Left]
Adjust Stamp Position
You can adjust the position in which the stamp is printed.
The position where the stamp is printed and the range within which that position can be adjusted are shown in the following table. The values for defaults and possible ranges given in the table are the distance from each side of the paper.
(mainly Europe and Asia)Stamp positions
Default
Possible range
Top Left
32 mm from the left edge
8 mm from the top edge
From 4 to 144 mm from the left edge
From 4 to 144 mm from the top edge
Top Center
Center
8 mm from the top edge
From 0 to 72 mm to the right or left of the center
From 4 to 144 mm from the top edge
Top Right
12 mm from the right edge
8 mm from the top edge
From 4 to 144 mm from the right edge
From 4 to 144 mm from the top edge
Bottom Left
32 mm from the left edge
8 mm from the bottom edge
From 4 to 144 mm from the left edge
From 4 to 144 mm from the bottom edge
Bottom Center
Center
8 mm from the bottom edge
From 0 to 72 mm to the right or left of the center
From 4 to 144 mm from the bottom edge
Bottom Right
12 mm from the right edge
8 mm from the bottom edge
From 4 to 144 mm from the right edge
From 4 to 144 mm from the bottom edge
(mainly North America)Stamp positions
Default
Possible range
Top Left
1.3 inches from the left edge
0.3 inches from the top edge
From 0.2 to 5.7 inches from the left edge
From 0.2 to 5.7 inches from the top edge
Top Center
Center
0.3 inches from the top edge
From 0 to 2.8 inches to the right or left of the center
From 0.2 to 5.7 inches from the top edge
Top Right
0.5 inches from the right edge
0.3 inches from the top edge
From 0.2 to 5.7 inches from the right edge
From 0.2 to 5.7 inches from the top edge
Bottom Left
1.3 inches from the left edge
0.3 inches from the bottom edge
From 0.2 to 5.7 inches from the left edge
From 0.2 to 5.7 inches from the bottom edge
Bottom Center
Center
0.3 inches from the bottom edge
From 0 to 2.8 inches to the right or left of the center
From 0.2 to 5.7 inches from the bottom edge
Bottom Right
0.5 inches from the right edge
0.3 inches from the bottom edge
From 0.2 to 5.7 inches from the right edge
From 0.2 to 5.7 inches from the bottom edge
Page to Stamp
You can have the stamp printed on the first page or all pages.
Default: [All Pages]
Adj. Back Side Stamp Position
You can adjust the stamp position for back side in duplex mode, within the available range as shown below.
- (mainly Europe and Asia)
Left-Right: Left 432 mm–Right 432 mm
Top-Bottom: Top 432 mm–Bottom 432 mm
Default: [0 mm]
- (mainly North America)
Left-Right: Left 17.0 inches–Right 17.0 inches
Top-Bottom: Top 17.0 inches–Bottom 17.0 inches
Default: [0.0 inch]
For details about how to change the Copier / Document Server Features, see "Accessing User Tools", Device Management.
