Page Numbering

You can select the page number format given priority when [Page Numbering] is pressed.

Default: [P1,P2...]

You can select the font in Page Numbering mode.

Default: [Font 1]

You can select the size of the stamp printed in Page Numbering mode.

Default: [Auto]

You can select the position of the duplex back page number printed in Duplex mode.

Default: [Opposite Position]

You can select the position of the duplex back page number printed in Duplex mode.

Default: [Same Position]

You can select page numbering when using the Combine function and the Page Numbering function together.

Default: [Per Original]

You can select whether or not to print the page number onto slip sheets when using the Designate function set to "Copy" and the Page Numbering function together.

Default: [Off]

Specify how each of stamps is printed.

• Stamp Position

  Specify where to print the stamp. For details about the stamp position, see "Stamps", Basic Operations.

  Default for the patterns of [P1,P2...], [1/5,2/5...], [P.1,P.2...], and [1,2...]: [Top Right]

  Default for the patterns of [-1-,-2-...] and [1-1,1-2...]: [Bottom Center]

• Adjust Stamp Position

  You can adjust the position in which the stamp is printed.

  The position where the stamp is printed and the range within which that position can be adjusted are shown in the following table. The values for defaults and possible ranges given in the table are the distance from each side of the paper.

  (mainly Europe and Asia)

  Stamp positions	Default	Possible range
  Top Left	12 mm from the left edge 12 mm from the top edge	From 4 to 144 mm from the left edge From 4 to 144 mm from the top edge
  Top Center	Center 12 mm from the top edge	From 0 to 72 mm to the right or left of the center From 4 to 144 mm from the top edge
  Top Right	12 mm from the right edge 12 mm from the top edge	From 4 to 144 mm from the right edge From 4 to 144 mm from the top edge
  Bottom Left	12 mm from the left edge 8 mm from the bottom edge	From 4 to 144 mm from the left edge From 4 to 144 mm from the bottom edge
  Bottom Center	Center 8 mm from the bottom edge	From 0 to 72 mm to the right or left of the center From 4 to 144 mm from the bottom edge
  Bottom Right	12 mm from the right edge 8 mm from the bottom edge	From 4 to 144 mm from the right edge From 4 to 144 mm from the bottom edge

  (mainly North America)

  Stamp positions	Default	Possible range
  Top Left	0.5 inches from the left edge 0.5 inches from the top edge	From 0.2 to 5.7 inches from the left edge From 0.2 to 5.7 inches from the top edge
  Top Center	Center 0.5 inches from the top edge	From 0 to 2.8 inches to the right or left of the center From 0.2 to 5.7 inches from the top edge
  Top Right	0.5 inches from the right edge 0.5 inches from the top edge	From 0.2 to 5.7 inches from the right edge From 0.2 to 5.7 inches from the top edge
  Bottom Left	0.5 inches from the left edge 0.3 inches from the bottom edge	From 0.2 to 5.7 inches from the left edge From 0.2 to 5.7 inches from the bottom edge
  Bottom Center	Center 0.3 inches from the bottom edge	From 0 to 2.8 inches to the right or left of the center From 0.2 to 5.7 inches from the bottom edge
  Bottom Right	0.5 inches from the right edge 0.3 inches from the bottom edge	From 0.2 to 5.7 inches from the right edge From 0.2 to 5.7 inches from the bottom edge

• Adj. Back Side Stamp Position

  You can adjust the stamp position for back side in duplex mode, within the available range as shown below.

  • (mainly Europe and Asia)

    Left-Right: Left 432 mm–Right 432 mm

    Top-Bottom: Top 432 mm–Bottom 432 mm

    Default: [0 mm]

  • (mainly North America)

    Left-Right: Left 17.0 inches–Right 17.0 inches

    Top-Bottom: Top 17.0 inches–Bottom 17.0 inches

    Default: [0.0 inch]

You can have page numbers printed in white when they overlap black parts of the image.

Default: [Off]

You can select the page numbering initial letter between [P1,P2.../P.1,P.2...] and [S1,S2.../S.1,S.2...].

Default: [P1,P2.../P.1,P.2...]