Previous
This section describes the user tools in the User Stamp menu under [Stamp].
Program / Delete Stamp
You can register, change, or delete user stamps.
You can register up to five custom stamps with your favorite designs.
For details about how to register, change, or delete the user stamp, see "Registering a user stamp" or "Deleting the user stamp", Basic Operations.
Stamp Format:1–5
Specify how each of registered user stamps 1 to 5 is printed.
Stamp Position
Specify where to print the user stamp. For details about the stamp position, see "Stamps", Basic Operations.
Default: [Top Right]
Adjust Stamp Position
You can adjust the position in which the stamp is printed.
The position where the stamp is printed and the range within which that position can be adjusted are shown in the following table. The values for defaults and possible ranges given in the table are the distance from each side of the paper.
(mainly Europe and Asia)Stamp positions
Default
Possible range
Top Left
24 mm from the left edge
24 mm from the top edge
From 4 to 144 mm from the left edge
From 4 to 144 mm from the top edge
Top Center
Center
24 mm from the top edge
From 0 to 72 mm to the right or left of the center
From 4 to 144 mm from the top edge
Top Right
24 mm from the right edge
24 mm from the top edge
From 4 to 144 mm from the right edge
From 4 to 144 mm from the top edge
Center Left
24 mm from the left edge
Center
From 4 to 144 mm from the left edge
From 0 to 72 mm to the toward the top or bottom of the center
Center
Center
From 0 to 72 mm to the right or left of the center
From 0 to 72 mm to the toward the top or bottom of the center
Center Right
24 mm from the right edge
Center
From 4 to 144 mm from the right edge
From 0 to 72 mm to the toward the top or bottom of the center
Bottom Left
24 mm from the left edge
24 mm from the bottom edge
From 4 to 144 mm from the left edge
From 4 to 144 mm from the bottom edge
Bottom Center
Center
24 mm from the bottom edge
From 0 to 72 mm to the right or left of the center
From 4 to 144 mm from the bottom edge
Bottom Right
24 mm from the right edge
24 mm from the bottom edge
From 4 to 144 mm from the right edge
From 4 to 144 mm from the bottom edge
(mainly North America)Stamp positions
Default
Possible range
Top Left
1.0 inch from the left edge
1.0 inch from the top edge
From 0.2 to 5.7 inches from the left edge
From 0.2 to 5.7 inches from the top edge
Top Center
Center
1.0 inch from the top edge
From 0 to 2.8 inches to the right or left of the center
From 0.2 to 5.7 inches from the top edge
Top Right
1.0 inch from the right edge
1.0 inch from the top edge
From 0.2 to 5.7 inches from the right edge
From 0.2 to 5.7 inches from the top edge
Center Left
1.0 inch from the left edge
Center
From 0.2 to 5.7 inches from the left edge
From 0 to 2.8 inches to the toward the top or bottom of the center
Center
Center
From 0 to 2.8 inches to the right or left of the center
From 0 to 2.8 inches to the toward the top or bottom of the center
Center Right
1.0 inch from the right edge
Center
From 0.2 to 5.7 inches from the right edge
From 0 to 2.8 inches to the toward the top or bottom of the center
Bottom Left
1.0 inch from the left edge
1.0 inch from the bottom edge
From 0.2 to 5.7 inches from the left edge
From 0.2 to 5.7 inches from the bottom edge
Bottom Center
Center
1.0 inch from the bottom edge
From 0 to 2.8 inches to the right or left of the center
From 0.2 to 5.7 inches from the bottom edge
Bottom Right
1.0 inch from the right edge
1.0 inch from the bottom edge
From 0.2 to 5.7 inches from the right edge
From 0.2 to 5.7 inches from the bottom edge
Page to Stamp
You can have the stamp printed on the first page or all pages.
Default: [All Pages]
Adj. Back Side Stamp Position
You can adjust the stamp position for back side in duplex mode, within the available range as shown below.
- (mainly Europe and Asia)
Left-Right: Left 432 mm–Right 432 mm
Top-Bottom: Top 432 mm–Bottom 432 mm
Default: [0 mm]
- (mainly North America)
Left-Right: Left 17.0 inches–Right 17.0 inches
Top-Bottom: Top 17.0 inches–Bottom 17.0 inches
Default: [0.0 inch]
For details about how to change the Copier / Document Server Features, see "Accessing User Tools", Device Management.
