When ejecting carbonless paper weighing less than 63g/m2 to Finisher SR5110 or Booklet Finisher SR5120
Previous
When printing on carbonless paper weighing less than 63g/m2, set the banner support tray on the finisher shift tray.
For details about how to attach the banner support tray, see When ejecting paper weighing less than 52.2g/m2 to Finisher SR5110 or Booklet Finisher SR5120.
Depending on the brand of the paper being used, the paper may be ejected normally even when the banner support tray is not attached.
When the banner support tray is attached, output sheets may not be stacked neatly.
If you set [Finisher Output Tray Setting] to [Auto Change] and [Do not Stack Jobs], and change where to deliver the paper when the banner support tray is attached, multiple jobs maybe delivered to and stacked on the same tray.
