Previous
For each user registered in the Address Book, you can register a login user name and login password to be used when accessing an LDAP server.
To use an LDAP server, you need to program it beforehand. For details, see Programming the LDAP Server.
When [Do not Specify] is selected for LDAP Authentication, the User Name and Password that you have specified in Program / Change / Delete LDAP Server of Administrator Tools settings are applied. For details, see Programming the LDAP Server.
If User Authentication is specified, contact your administrator.
Press [Home] (
) at the bottom of the screen in the center.
Press the [User Tools] (
) icon on the [Home] screen.
Press [Address Book Management].
Check that [Program / Change] is selected.
Press the name you want to register or enter the registered number using the number keys.
You can search by the registered name, user code, folder name, or e-mail address.
Press [Auth. Info], and then press [
Next].
Press [Specify Other Auth. Info] under "LDAP Authentication".
Press [Change] under "Login User Name".
Enter the login user name, and then press [OK].
Press [Change] under "Login Password".
Enter the password, and then press [OK].
Enter the password again to confirm, and then press [OK].
Press [OK].
Press [Exit].
Press [Home] () at the bottom of the screen in the center.
To register the name, see Registering User Information.
You can enter up to 128 characters for user name and password.
