Skip header
 

Copying from the Multi Bypass Tray (Tray A)

Use the multi bypass tray (Tray A) to copy onto transparencies, translucent paper, and paper that cannot be loaded in the paper trays.

For details about the optional units required for this function, see "Functions Requiring Optional Configurations", Device Management.

About how to load paper in the multi bypass tray (Tray A), see Preparation for details.

If the paper type you want to copy onto is not shown on the [Paper Type] screen, you must specify the paper type under [Tray Paper Settings]. For details about [Tray Paper Settings], see "Tray Paper Settings", Preparation.

1Load the paper face up in the multi bypass tray (Tray A).

2Press [Tray A].

3Press [Paper Size].

4Specify the size of the paper, and then press [OK].

5Press [Paper Type].

6Specify the type of the paper as necessary, and then press [OK].

7Place the originals, and then press the [Start] key.

8When the copy job is finished, press [Reset] to clear the settings.