Skip header
 

Copying onto custom size paper from the multi bypass tray (Tray A)

Sizes of paper that can be fed from the multi bypass tray (Tray A) are as follows:

1Load the paper face up in the multi bypass tray (Tray A).

2Press [Tray A].

3Press [Paper Size].

4Press [Program Custom Size].

5Enter the horizontal size with the number keys, and then press [Sharp].

Operation panel screen illustration

6Enter the vertical size with the number keys, and then press [Sharp].

7Press [OK] twice.

8Place the originals, and then press the [Start] key.

Note