Previous
Printing the first set of a document
Click the menu button of the application you are using, and then click [Print].
Select the printer you want to use.
Click [Preferences].
In the "Job Type:" list, click [Sample Print].
Click [Details...].
Enter a User ID in the "Enter User ID:" box.
Click [OK].
Change any other print settings if necessary.
Click [OK].
Start printing from the application's [Print] dialog box.
Printing the remaining sets of the document
When printing is completed, the stored file will be deleted.
Press [Home] (
) at the bottom of the screen in the center.
Press the [Printer (Classic)] icon.
Press the [Print Jobs] tab.
Press [Sample Print Job].
Select the files you want to print.
You can select all the Sample Print files at once by pressing [Select All Jobs] after selecting a file.
If necessary, press [Preview] to check the print image of the document.
Only the first page of the document is displayed in the preview screen. No previews can be displayed when more than one document is selected.
Press [Exit] to close the preview screen.
Press [Print].
To change the print settings of the document, press [Detailed Settings].
For details about the settings that can be configured, see Settings that can be configured on the control panel.
Enter the number of copies using the number keys if necessary, and then press [Print].
Press [Home] () at the bottom of the screen in the center.
If you change the number of copies when multiple documents are selected, the newly specified number of copies will be printed for all of the selected documents. If you do not change the number, the number of copies specified when the documents were stored will be printed for each document.
To stop printing after printing has started, press [Job Reset] or the [Stop] key on the [Printer (Classic)] screen. The file will be deleted.
You can also print a Sample Print file from Web Image Monitor. For details, see Web Image Monitor Help.
Deleting Sample Print files
If you are not satisfied with the sample printout, you can delete the Sample Print file, revise it and print it again until the settings are suitable.
Press [Home] () at the bottom of the screen in the center.
Press the [Printer (Classic)] icon.
Press the [Print Jobs] tab.
Press [Sample Print Job].
Select the files you want to delete.
You can select all the Sample Print files at once by pressing [Select All Jobs] after selecting a file.
Press [Delete].
Press [Yes].
Press [Home] () at the bottom of the screen in the center.
You can also delete a Sample Print file from Web Image Monitor. For details, see Web Image Monitor Help.
