Previous
The print settings for a document stored in the machine can be changed using the "Detailed Settings" screen on the control panel. The following settings can be changed:
Input Tray
Specify the input tray to use for printing.
Quantity
Use the number keys to specify the number of copies (1 to 9,999) that you want to print.
Edit tab
2 Sided
When printing on both sides, specify a binding method.
Finishing tab
Sort / Stack
When printing multiple sets, specify whether to print in batches or ordered sets.
Staple
If an optional finisher is installed, you can specify the staple settings. Note that for stapling, only staple positions can be specified. In addition, if paper is set to be selected automatically, staple positions may not be as expected.
Punch
If an optional finisher is installed, you can specify the punch settings. In addition, if paper is set to be selected automatically, punch positions may not be as expected.
Details tab
Toner Saving
Reduces toner consumption when printing. If this setting is enabled, print quality may lower.
Rotate by 180 Degrees
Specify whether to rotate the print image 180 degrees relative to the paper orientation.
If [Restrict Direct Print Jobs] or [Store and Skip Errored Job] is used to store a document automatically, the print settings of the document cannot be changed in the [Detailed Settings] screen. For details about [Restrict Direct Print Jobs], see Preventing Documents from Being Left Unattended or Taken By Mistake. For details about [Store and Skip Errored Job], see Storing jobs with errors automatically.
