List/Test Print
This section describes the settings in [List/Test Print] under [Printer Settings].
Introduction of Two Types of Setting Screens (Standard/Classic)
The paper is fed from the tray in which A4 (or 81/2 × 11) plain paper / recycled paper is set.
If the specified paper is not set in the tray, the paper is fed from the tray specified by [Tray/Paper Settings]
[Paper Tray Priority][Paper Tray Priority: Printer].
Machine Information
Items | Description |
|---|---|
Multiple Lists | You can print the configuration page and error log. |
Configuration Page | You can print the machine's current values of the Printer Settings. |
Error Log | You can print error logs for the 30 most recent errors that occurred during printing. The error logs of jobs canceled are also printed. Error logs older than the 30 most recent jobs are deleted and not printed. However, if the oldest error belongs to Sample Print, Locked Print, Hold Print, or Stored Print, it is not deleted. Instead, it will be stored separately up to 30. |
PDL Information
Items | Description |
|---|---|
PCL Config./Font Page | You can print the current configuration and installed PCL font list. |
PS Config./Font Page | You can print the current configuration and installed PostScript font list. |
PDF Config./Font Page | You can print the current configuration and installed PDF font list. |
Sample Pages
Items | Description |
|---|---|
Color Test Chart | The machine prints a sheet to check that the colors (C, M, Y, and K) can be printed properly. |
Change Modes
Items | Description |
|---|---|
Hex Dump | The machine enters the mode to print hexadecimal data sent from the computer (Hex Dump mode). Use this function to determine how a printing error occurred. |
Print Settings
Items | Description |
|---|---|
Side(s) to Print of List/Test Print | Specify whether to print [List/Test Print] on one side or both sides of paper. This function is available on machines implemented with RICOH Always Current Technology v1.2 or later.
|