Host Interface (Standard)

This section describes the settings in [Host Interface] under [Printer Settings].

Introduction of Two Types of Setting Screens (Standard/Classic)

Items	Description
I/O Buffer	You can specify the memory size of the I/O buffer. Normally it is not necessary to change this. Default: [128 KB]
I/O Timeout	This is the setting for printing via parallel or USB interface. Specify the time to lock the interface switch (10 to 60 seconds) to prevent interrupting the data transmission with a print job from another interface. If the specified time is too short, a timeout may occur during the data transmission. Default: [15 seconds]

Items

Description

I/O Buffer

You can specify the memory size of the I/O buffer. Normally it is not necessary to change this.

Default: [128 KB]

I/O Timeout

This is the setting for printing via parallel or USB interface. Specify the time to lock the interface switch (10 to 60 seconds) to prevent interrupting the data transmission with a print job from another interface.

If the specified time is too short, a timeout may occur during the data transmission.

Default: [15 seconds]