Copying onto Envelopes
This section describes how to copy onto regular size and custom size envelopes. Place the original on the exposure glass and place the envelope in the bypass tray or paper tray.
Specify the thickness of the paper according to the weight of the envelopes you are printing on. For details about the relationship between paper weight and paper thickness and the sizes of envelopes that can be used, see User Guide of your device.
About handling envelopes, supported envelope types, and how to load envelopes, see User Guide of your device.
The Duplex function cannot be used with envelopes. If the Duplex function is specified, press [1 sided → 2 sided:TtoT] to cancel the setting.
Load the envelope in the bypass tray.
The bypass tray paper settings screen is automatically displayed.Press [Change Setting].
Select the [Envelope], and then press the [Next] icon.
Select the size of envelope, and then press [OK] twice.
Place the originals, and then press [Start].
For details about using envelopes, see Copying onto Envelopes.
: Horizontal
: Vertical
Be sure to include the fully open flap in the horizontal dimension.
Load the envelope in the bypass tray.
The bypass tray paper settings screen is automatically displayed.Press [Change Setting].
Select the [Envelope], and then press the [Next] icon.
Press [Custom Size].
Press the [A] text box and enter the size using the soft keyboard, and then press [Done].
Press the [B] text box and enter the size using the soft keyboard, and then press [Done].
Press [OK] three times.
Place the originals, and then press [Start].
For details about using envelopes, see Copying onto Envelopes.