Copying onto OHP Transparencies

Important

  • Usually only one side of OHP transparencies can be used for printing. Be sure to load them with the print side down.

  • The Duplex function cannot be used with OHP transparencies. If the Duplex function is specified, press [1 sided → 2 sided:TtoT] to cancel the setting.

  1. Load the paper in the bypass tray.
    The bypass tray paper settings screen is automatically displayed.

  2. Press [Change Setting].

  3. Select the [OHP (Transparency)], and then press the [Next] icon.

  4. Select the paper size and orientation, and then press [OK] twice.

  5. Place the originals, and then press [Start].

Note

  • When copying onto OHP transparencies, remove copied sheets one by one.

  • For details about the sizes of OHP transparencies that can be used, see User Guide of your device.

x

QR Code