Previous
A misfeed has occurred in the place corresponding to the letter displayed on the control panel.
Open the front cover at the location indicated by the displayed letter, and check for a paper jam. If a lamp is lit, open the guide plate at the location indicated by the lamp, and check for a paper jam.
Multiple paper misfeed locations may be indicated at the same time. When this happens, check all the areas indicated.
If there is no misfed paper in the area you check first, see the other areas that are indicated.
If coated paper frequently becomes jammed and causes "U" to appear, contact your service representative.
If a paper misfeed occurs in Rb1 – Rb5, check whether any paper has been output on top of the paper press of the finisher shift tray. If there is paper on top of the paper press, remove the paper, and then remove the misfed paper from inside the finisher.
