Aligning the Image Position on Side 2 to That on Side 1 (Using a Template to Align the Image Position on Side 1 and 2)
Previous
This section explains how to adjust settings so that images on both sides are aligned using duplex printing.
First, print the format and measure the length of specified parts. By specifying the measured length on the machine, you can adjust the image position automatically.
It is necessary to specify the settings for each paper size being used. The adjusted settings are stored as custom paper presets and can be applied again in the future.
To adjust the image position, the machine administrator privilege is required.
When manual adjustments or adjustments using a template are performed, even if 1103: [Image Position Feedback Correction] is set to [Detection Mark: Back] or [Detection Mark: Front & Back], the adjustments may not correct the image position. When using 1103: [Image Position Feedback Correction] with [Detection Mark: Back] or [Detection Mark: Front & Back] set, auto image position adjustment is required.
