Preparation

PreviousNext

To adjust the image position, you need to:

• Prepare a 500 mm or longer stainless steel ruler (with the scale in 0.5 mm) and magnifier (for measuring the format)

• Check the supported paper size and paper type.

• From the supplied CD, print the file of the format matching the size of the paper requiring image position adjustment.

• To adjust the following settings, pre-register the type of paper in use as a custom paper. For details about registering custom papers, see "Specifying a Custom Paper", Preparation.

• Select 1101: [Image Position], and then adjust the image position on Side 1. For details about adjusting the position, see Adjusting the Image Position on Side 1.

• Select 1101: [Image Position], and then set the values in the following settings to "0".

  [Across Feed] of [Image Position Result: Side 2]

  [With Feed] of [Image Position Result: Side 2]

  [Across Feed] of [Image Position Result: Adjust Front & Back]

  [With Feed] of [Image Position Result: Adjust Front & Back]

  [Across Feed] of [Image Magnification Result: Side 2]

  [With Feed] of [Image Magnification Result: Side 2]

  [Across Feed] of [Image Magnification Result: Adjust Front & Back]

  [With Feed] of [Image Magnification Result: Adjust Front & Back]

  [Opposite Side of Operator] of [Trapezoidal Distortion Result: Side 2]

  [Operator Side] of [Trapezoidal Distortion Result: Side 2]

  [Opposite Side of Operator] of [Trapezoidal Distortion Result: Adjust Front & Back]

  [Operator Side] of [Trapezoidal Distortion Result: Adjust Front & Back]