Previous
When this function is selected, the machine punches holes along the long edge of the paper and binds sheets with ring combs. Ring Binding can be applied to A4 or Letter (81/2 × 11) size paper.
For details about the optional units required for this function, see "Functions Requiring Optional Configurations", Device Management.
The paper types that can be used for Ring Binding are as follows:
Plain, Recycled, Transparency, Color, Letterhead, Tab Stock, Tab Stock: Glossy, Tab Stock: Matte, Tab Stock: High Gloss, Black, Coated: High Gloss, Coated (Glossy), Coated (Matte), Metallic/Pearl, Synthetic, Textured
Specifying the Ring Binding Settings
If the PCL 6 printer driver is used, the Ring Binding can be specified in the Finishing menu on the Detailed Settings tab. If the PCL 5c printer driver is used, it can be specified in the [Setup] tab. For printing methods, see the printer driver Help.
When binding output sheets with ring combs, specify the number of sheets to be bound between 2 and 100. If there is only one sheet, it will be punched with ring comb holes but not bound.
If you are using 50-sheet type ring combs, you can bind up to 50 sheets of plain paper into a single booklet. If you are using 100-sheet type ring combs, you can bind up to 100 sheets of plain paper into a single booklet. The number of sheets that can be bound with ring combs varies depending on paper weights.
Collate is automatically enabled if the Ring Binding is specified.
