Notes on Configuring the Perfect Binding

Perfect Binding will be canceled or a job reset may occur if:

• The machine is configured to continue printing manually.

• [Auto Continue] is specified.

• Tray A is specified as the source tray.

• [Driver / Command] is selected in [Tray Setting Priority] for the specified source tray.

• Cover Sheets is specified.

• Slip Sheets is specified.

• Separation Sheets is specified.

• The staple function is specified.

• The punch function is specified.

• The fold function is specified.

• Paper is ejected with its printed side facing up.

• Ring Binding is specified.

• Perfect binder is not attached.

• Perfect Binding cannot be used for the selected tray, paper size, or paper type.

• Perfect Binding cannot be used for the selected paper orientation.

• The number of sheets exceeds the maximum Perfect Binding number.

• Sheets of paper to be bound using Perfect Binding are thicker than 200 sheets of plain paper.

The following functions will be canceled when specified with Perfect Binding at the same time:

• Stack

• Extended Auto Tray Switching

• Sub Paper Size^*1

^*1 The setting is applied to inside pages only.