Skip header
 

Copying onto transparencies

Important

  • Usually only one side of transparencies can be used for printing. Be sure to load them with the print side up.

1Load the paper face up in the multi bypass tray (Tray A).

2Press [Tray A].

3Press [Paper Size].

4Specify the paper size, and then press [OK].

5Press [Paper Type].

6Press [Transparency], and then press [OK].

7Place the originals, and then press the [Start] key.

Note

  • When copying onto transparencies, remove copied sheets one by one.

  • For details about the sizes of transparencies that can be used, see "Recommended Paper Sizes and Types", Preparation.

  • You can also load transparencies into Tray 2 and the wide LCT to make copies on it. Be sure to specify the paper type under [Tray Paper Settings]. For details, see "Changing Tray Paper Settings", Preparation.