Previous
If you cannot make copies as you want because of the paper type, paper size, or paper capacity problems, use the supported paper. For details about the supported paper, see "Supported Paper Sizes and Types", Paper Specifications and Adding Paper.
Message |
Cause |
Solution |
|---|---|---|
“Check paper size.” |
An irregular paper size is set. |
If you press [Start], the copy will start using the selected paper. |
“Exceeded the maximum number of sheets that can be used. Copying will be stopped.” |
The number of pages the user is permitted to copy has been exceeded. |
For details about how to check the number of copies available per user, see "Managing Print Volume per User", Security Guide. |
“Maximum number of sets is n.” ("n" is replaced by a variable.) |
The number of copies exceeds the maximum copy quantity. |
You can change the maximum copy quantity from [Max. Copy Quantity] in [General Features] under [Copier Features]. For details about [Max. Copy Quantity], see "General Features", Copy. |
“Memory is full. nn originals have been scanned. Press [Print] to copy scanned originals. Do not remove remaining originals.” ("n" is replaced by a variable.) |
The number of scanned originals exceed the number of pages that can be stored in memory. |
Press [Print] to copy scanned originals and cancel the scanning data. Press [Clear Memory] to cancel the scanning data and not copy. |
“Press [Continue] to scan and copy remaining originals.” |
The machine checked if the remaining originals should be copied, after the scanned originals were printed. |
Remove all copies, and then press [Continue] to continue copying. Press [Stop] to stop copying. |
