Message |
Cause |
Solution |
---|---|---|
“Please wait.” |
This message appears when the machine is warming up. |
|
“Please wait.” |
This message appears when you change the toner cartridge. |
Wait for a while. If the message does not disappear in 5 minutes, turn off the power and make sure the main power indicator turns off. Wait at least 10 seconds, and then turn on the power again. If the message remains displayed for more than 5 minutes, contact your service representative. |
“Please wait.” |
The current environmental condition is outside the recommended temperature range for the machine. |
For details about the optimum environmental conditions for the machine, see "Install Location", Maintenance and Specifications. |
“Shutting down... Please wait. Main power will be turned off automatically.” |
The shut down procedure has begun because the power was turned off while the machine was in standby mode or performing an operation. |
|
“Reduce paper in n to limit mark or reset it correctly.” ("n" is replaced by a variable.) |
The number of sheets that are loaded exceeds the capacity of the paper tray. |
Reduce the amount of paper loaded in the paper tray that is displayed on the screen so that it does not exceed the upper limit markings ( |