Message |
Cause |
Solution |
---|---|---|
“Classification Code is incorrect. The job has been cancelled.” |
The classification code has not been entered, or the classification code has been entered incorrectly. |
Enter the correct classification code. |
“Classification Code is incorrect. The job has been cancelled.” |
The classification code is not supported with the printer driver. |
Select [Optional] for classification code. For details about how to specify classification code settings, see Configuring Classification Codes. |
“Duplex has been cancelled.” |
Duplex printing was canceled. |
|
“Exceeded max. pages. Collate is incomplete.” |
The number of pages exceeds the maximum number of sheets that you can use Collate with. |
Reduce the number of pages to print. |
“Output tray has been changed.” |
The output tray was changed because the paper size of the specified output tray is limited. |
Specify the proper output tray. |
“Print overrun.” |
Images were discarded while printing. |
Select a lower resolution on the printer driver. For details about how to change the resolution setting, see the printer driver Help. |
“Punch has been cancelled.” |
Punch printing was canceled. |
Check the paper orientation, print orientation, and then punch position. Certain settings can produce print results that might not be as expected. |
“Staple has been cancelled.” |
Stapling printing was canceled. |
Check the paper orientation, paper quantity, print orientation, and staple position. Certain settings can produce print results that might not be as expected. |
“Z-fold error.” |
Z-fold was canceled. |
Check the tray, paper orientation, print orientation, and fold position. |