Previous
Configuration:
Desktop
Hard disk
320 GB
Photosensitivity type:
OPC drum
Print process:
Laser beam scanning and electro-photographic printing
Development:
Dry two-component magnetic brush development system
Fusing:
Direct Heating (DH) fusing
Warm-up time (23 °C (73.4 °F), rated voltage)
21 seconds
Paper size:
Trays 1–2 and the bypass tray:
For details, see Recommended Paper Sizes and Types.
Duplex:
A3
, A4
, A5, A6, B4 JIS, B5 JIS, B6 JIS,11 × 17
, 81/2 × 14, 81/2 × 13, 81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13, 8 × 10, 71/4 × 101/2, 51/2 × 81/28K
, 16K, 12 × 18, 11 × 15, 10 × 14, 81/2 × 132/5Duplex (custom size):
Vertical: 90.0–297.0 mm (3.55–11.69 inches)
Horizontal: 148.0–431.8 mm (5.83–17.00 inches)
Paper weight:
Trays 1–2 and the bypass tray: For details, see Recommended Paper Sizes and Types.
Duplex: 52–256 g/m2 (14 lb. Bond–140 lb. Index)
For details about and recommendations concerning thick paper, see Thick paper.
First print time:
2.7 seconds
(A4, 81/2 × 11, delivered face down, feeding from tray 1)
Print speed:
60 sheets/minute (A4, 81/2 × 11)
Paper capacity (80 g/m2, 20 lb. Bond):
For details, see Recommended Paper Sizes and Types.
Power requirements:
(mainly Europe and Asia)220–240 V, 8 A, 50/60 Hz
(mainly North America)120–127 V, 12 A, 60 Hz
Power consumption
- (mainly Europe and Asia)
Main unit only
Specification
Ready
43.4 W
During printing
825 W
Maximum
1,780 W or less
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
Complete system
Specification
Maximum
1,780 W or less
The complete system consists of the main unit, lower paper trays, bridge unit, and Finisher SR3230.
- (mainly North America)
Main unit only
Specification
Ready
38.6 W
During printing
790 W
Maximum
1,600 W or less
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
Complete system
Specification
Maximum
1,600 W or less
The complete system consists of the main unit, lower paper trays, bridge unit, and Finisher SR3230.
Dimensions:
587 × 653 × 720 mm (23.2 × 25.7 × 28.3 inches)
Space for main unit (W × D):
1,149 × 1,205 mm (45.2 × 47.4 inches) (including the bypass tray and output trays)
Noise emission
- (mainly Europe and Asia)
Sound power level:
Main unit only
Specification
Stand-by
30.7 dB (A)
Printing
65.2 dB (A)
Complete system
Specification
Stand-by
34.1 dB (A)
Printing
71.2 dB (A)
Sound pressure level:
Main unit only
Specification
Stand-by
21.2 dB (A)
Printing
52.5 dB (A)
Complete system
Specification
Stand-by
20.7 dB (A)
Printing
58.0 dB (A)
Sound power level and sound pressure level are actual values measured in accordance with ISO 7779.
Sound pressure level is measured from the position of the bystander.
The complete system consists of the main unit, lower paper trays, large capacity tray (LCT), Mailbox, bridge unit, Finisher SR3230.
- (mainly North America)
Sound power level:
Main unit only
Specification
Stand-by
30.8 dB (A)
Printing
65.1 dB (A)
Complete system
Specification
Stand-by
34.0 dB (A)
Printing
70.8 dB (A)
Sound pressure level:
Main unit only
Specification
Stand-by
20.0 dB (A)
Printing
52.6 dB (A)
Complete system
Specification
Stand-by
20.4 dB (A)
Printing
57.4 dB (A)
Sound power level and sound pressure level are actual values measured in accordance with ISO 7779.
Sound pressure level is measured from the position of the bystander.
The complete system consists of the main unit, lower paper trays, large capacity tray (LCT), Mailbox, bridge unit, Finisher SR3230.
Weight:
Approx. 57 kg (125.7 lb.)
We have obtained each author's permission for the use of applications including open-source software applications. For details about the copyright information for these software applications, see "OSS.pdf", "copy_linux.txt", or "u-boot_copy.txt" on the CD-ROM supplied with the machine.
