Skip header
 

When using the Z-fold function with Finisher SR5070 or Booklet Finisher SR5080 and Multi-folding unit

To use the Z-fold function, you must attach the Z-fold support tray.

Finisher SR5070 and Booklet Finisher SR5080

  • Finisher shift tray

    Attach the Z-fold support tray*1 by inserting the two protrusions on its underside into the holes on the finisher shift tray.

    Z-fold support tray illustration

    *1 The back of the Z-fold support tray is embossed with "5".

Multi-folding unit

  1. Open the front cover of the multi-folding unit and take out the Z-fold support tray for multi-folding unit (located at the bottom of the multi-folding unit).

    Multi-folding unit illustration

  2. Attach the Z-fold support tray for multi-folding unit in the slope of the folding unit tray so that it is flush against the end fence.

    Z-fold support tray illustration

  3. Close the front cover of multi-folding unit.

    When you have finished using the Z-fold support tray for multi-folding unit, open the front cover of the multi-folding unit and re-attach the tray to its stowage hook.

PreviousNext