Copy tray
If you select this as the output tray, copied/printed paper is delivered here face down.
Multi bypass banner sheet tray
Allows you to load paper that has a horizontal length of 487.8 mm (19.21 inches) or longer in the bypass tray.
Banner sheet guide tray
Allows you to load paper that has a horizontal length of 487.8 mm (19.21 inches) or longer in the bypass tray.
Wide LCT
Holds 2,200 sheets of paper. Use to copy or print onto transparencies, adhesive labels, translucent paper, and custom size paper.
Extension unit
Attached to the LCT and holds 2,500 sheets of B4 JIS, A4, 81/2 × 14, or 81/2 × 11 paper.
Large capacity tray (LCT)
Holds up to 4,400 sheets of paper.
A3/11 × 17 tray unit
You can load paper sizes up to A3 or 11 × 17 in Tray 1 using this unit. To use this unit on your machine, you must contact your service representative and request that they install it for you. If you install the A3/11 × 17 tray unit on your machine, you cannot use it as a tandem tray.
Copy connector
Allows you to use the connect copy function.
Decurler unit
Flattens curls from sheets to prevent paper jams.
Buffer pass unit
Cools copies or prints.
Twin interposer
Inserts cover or slip sheets into copied or printed paper.
Multi-folding unit
The Multi-folding unit can apply the following folds: Half Fold, Letter Fold-out, Letter Fold-in, Double Parallel Fold, Gate Fold, and Z-fold.
Interposer
Inserts cover or slip sheets into copied or printed paper.
Booklet Finisher SR5080
Sorts, stacks, and staples multiple sheets of paper. The saddle stitch function can staple multiple sheets of paper in the center and fold them into booklets. Consists of the following paper trays:
Finisher upper tray
Finisher shift tray
Finisher booklet tray
Prints can be punched if the optional punch unit is installed on the finisher.
Finisher SR5070
Sorts, stacks, and staples multiple sheets of paper. Consists of the following paper trays:
Finisher upper tray
Finisher shift tray
Prints can be punched if the optional punch unit is installed on the finisher.
SR5000 series output tray for banner sheet
Allows you to output paper that has a horizontal length of 487.8 mm (19.21 inches) or longer on Finisher SR5070 or Booklet Finisher SR5080.
Booklet Finisher SR4130
Sorts, stacks, and staples multiple sheets of paper. The saddle stitch function can staple multiple sheets of paper in the center and fold them into booklets. Consists of the following paper trays:
Finisher upper tray
Finisher shift tray
Finisher booklet tray
Copies can be punched if the optional punch unit is installed on the finisher.
Output jogger
Jogs the sheets delivered to the finisher shift tray.
SR4000 series output tray for banner sheet
Allows you to output paper that has a horizontal length of 487.8 mm (19.21 inches) or longer on Finisher SR4120 or Booklet Finisher SR4130.
Finisher SR4120
Sorts, stacks, and staples multiple sheets of paper. Consists of the following paper trays:
Finisher upper tray
Finisher shift tray
Copies can be punched if the optional punch unit is installed on the finisher.
Mailbox
Sorts printed paper. Consists of mailbox output trays 1–9.
You cannot install multiple finishers simultaneously.
To use the twin interposer, Finisher SR5070 or Booklet Finisher SR5080 is required.
To use the Multi-folding unit, Finisher SR4120, Booklet Finisher SR4130, Finisher SR5070, or Booklet Finisher SR5080 is required.
To use the interposer, Finisher SR4120 or Booklet Finisher SR4130 is required.
To use the output jogger, Finisher SR4120 or Booklet Finisher SR4130 is required.
To use the mailbox, Finisher SR4120 or Booklet Finisher SR4130 is required.
Remove printouts from Finisher SR4120 or Booklet Finisher SR4130 by lifting them straightforwardly from the left side. If you remove printouts at an angle or towards the front, the shift tray may rise and catch them.
Related topics
Removing prints from Finisher SR4120 or Booklet Finisher SR4130 during printing