Previous
Orientation
You can set the page orientation.
Default: [Portrait]
Form Lines
You can set the number of lines per page.
The number of lines can be specified from 5 to 128 by increments of one.
Default:
(mainly Europe and Asia)"64" lines
(mainly North America)"60" lines
Font Source
You can set the storage location of the default font.
Default: [Resident]
[RAM], [HDD], and [SD] can be selected only when fonts have been downloaded to the machine.
Font Number
You can set the ID of the default font you want to use.
When [Resident] is selected under [Font Source]:
The font number can be specified from 0 to 63 by increments of one.
Default: "0"
When [RAM], [HDD], or [SD] is selected under [Font Source]:
The font number can be specified from 1 up to number of fonts stored on the machine.
Default: "1"
Point Size
You can set the point size you want to use for the selected font.
The number of point sizes can be specified from 4.00 to 999.75 by increments of 0.25.
This setting is effective only with proportional fonts.
Default: "12.00" points
Font Pitch
You can set the number of characters per inch for the selected font.
The number of characters per inch can be specified from 0.44 to 99.99 by increments of 0.01.
This setting is effective only with monospaced fonts.
Default: "10.00" pitches
Symbol Set
You can specify the character set of the selected font.
Default: [PC-8]
The available options are as follows:
Roman-8, Roman-9, ISO L1, ISO L2, ISO L5, ISO L6, ISO L9, PC-775, PC-8, PC-8 D/N, PC-850, PC-852, PC-858, PC8-TK, PC-1004, Win L1, Win L2, Win L5, Win Baltic, Desktop, PS Text, MS Publ, Math-8, PS Math, Pifont, Legal, ISO 4, ISO 6, ISO 11, ISO 15, ISO 17, ISO 21, ISO 60, ISO 69, Win 3.0, MC Text, UCS-2, PC-864, Arabic-8, Win Arabic, PC-866, PC-866U, ISO Cyrillic, Win Cyrillic, PC-851, Greek-8, ISO Greek, PC-8 Greek, Win Greek, PC-862, Hebrew-7, Hebrew-8, ISO Hebrew
Nimbus Mono Font
You can select a font type.
Default: [Regular]
Extend A4 Width
You can extend the printing area width when printing on A4 sheet.
Default: [Off]
Append CR to LF
When set to [On], a carriage return will follow each line feed: CR=CR, LF=CR-LF, FF=CR-FF.
Default: [Off]
Resolution
You can set the print resolution in dots per inch.
Default: [600 dpi (Standard)]
Toner Saving
Reduces toner consumption when printing.
Default: [Off]
When the setting is [On], print quality may be degraded.
For details about how to change the Printer Features, see Accessing User Tools.
